Silicone Gel for Electronic Parts C-616

Typical Applications:

It’s typically applied for protecting electronic devices of high MOS against vapour and air pollution in long term, and for protecting wiring of high precision electrical appliances and hybird circuits as well, and it’s also applied as potting compound for protection of small electrical appliances.

Typical technical parameters:

Notes for application:

• Make sure the material to be protected is clean and dry;
• Make sure the two components are mixed in a ratio of 1:1 either by volume or weight; Vacuum (10~20 mm mercury column) pumping for 5 ~ 10 minutes is recommended.
• Put the C-616 under room/ambient temperature for 2 hours (which is referred by us as” the working hour”) after it’s mixed in recommended ratio, hence to have its viscosity doubled.  
• Try to avoid bringing in any air while operating as much as possible, and it’s recommended to perform the filling operation under vacuum condition for circuit boards of sophisticated shape ;

Special Notes:

While applying the C-616, please be noted especially not to expose it to any of following substances, otherwise, it may not be fully cured or even not be cured at all.

- Organic tin

- Silicone products that contain organic tin

- Sulfur-containing substances

- Amino group, polyurethane, amide and azide

Reparability:

C-616 has good reparability, and it itself is quite pressure-sensitively adhesive, therefore, the material under its repairing and adhesion effect can be well integrated consistently.

Package and Storage:

In general, C-616 is packed in a way of a combined unit (18kg+18kg).

Storage and Shelf Life:

Can be stored under room/ambient temperature.

C-616 has a shelf life of 12 months when it’s unpacked and remains in sealed status.
  

Safety Precautions:

Please refer to MSDS of the Product for details.

Limited Liabilities Disclaimer:

This Technical Datasheet of the Product truly represents results of various tests performed by Cosil by applying all of the existing testing approaches, however, it may not substitute any necessary test to be performed by the User before put the Product on trial as each scenario of application is specific to and thereby unique for each User. ONLY results of the tests performed by the User may be used by it to justify whether the Product is suitable for any of its applications. Cosil only warrants that the Product is proven to be in compliance with Cosil’s specification for ex-factory quality inspection, and Cosil does not make other warrants of any form, nor does it accept any claim clauses. In case of any issue arising from or concerning quality of the Product, Cosil shall be entitled to perform relevant tests once again on quality of the Product. If the quality of the Product is confirmed to be the cause of issue, Cosil’s liabilities will be only restricted or limited to replacing the Product in question or returning the amount of payment from sales of such Product, and Cosil will bear no liabilities for any indirect or consequential damage thereof. The User shall be responsible for complying with local safety rules and laws, and acquiring all licenses and permits as necessary. Cosil will bear no responsibilities or liabilities for any safety incidents occurred and/or losses incurred thereof in process of application of the Product. It’s duty of the User to check and make sure it has the latest version of the Technical Datasheet in hand, and Cosil may provide additional data/information(if any) upon the User’s request. Content of recommendation and/or suggestive remarks concerning application of the Product in this Technical Datasheet shall in no case be deemed or alleged as the cause for infringement of any patent rights.